“I installed it this morning.

Works perfectly.

Thank you.”

Customer from Saxony, Germany, commenting on the repair of a Yaskawa SGDH-10AE Servopack

A brief message that we were delighted to receive: following the repair, the unit was reinstalled. That same morning, the customer confirmed that it was working perfectly.

From Intermittent Startup Problems to Complete Failure

According to the customer, the problem mainly occurred when switching on the machine. Sometimes, the machine had to be switched off and on around 30 times before it would start. It would then occasionally run for days without any problems.

Eventually, the drive would no longer operate. The Servopack displayed alarm A.10.

The customer had already carried out a useful comparison: when the units were swapped between the X and Y axes, the fault followed the unit. This strongly pointed to the affected Servopack as the source of the problem.

Feedback After the Repair

We repaired the Yaskawa SGDH-10AE and returned it to the customer. After reinstallation, the maintenance team confirmed: “Works perfectly.”

Thank you for your trust and your personal feedback!

Photos of the Unit Before and After Repair

For more information about similar faults and our repair approach, please see our blog article:

https://www.industrypart.com/post/yaskawa-sgdh-10ae-servopack