“The unit has been back in use since your repair and has been running without any problems in our system ever since.”

The customer is a manufacturing company based in Baden-Württemberg, Germany, specialising in the precision machining of machine components as individual parts and in small batches.

Translated from the customer’s German message received in October 2026, almost eleven months after completion of the Fuji FRENIC 5000V2 FSD-37AR-23CZ repair.

Technical background

Components in the spindle drive’s power electronics were defective. industrypart repaired the affected section and replaced the damaged components with suitable parts. After the final replacement parts arrived, the final functional tests were completed without any problems. The drive was then returned to the customer.

Repair video and photographs

The original footage and photographs document the unit and a test run at industrypart at the time of repair. They do not show subsequent operation in the customer’s system.

Detailed repair report

Nameplate data and further technical information are available in the repair report for the Fuji FRENIC 5000V2 FSD-37AR-23CZ.

Fuji FSD-37AR-23CZ in the shop · Contact industrypart about a repair

About this customer feedback: This testimonial is based on a reply to our follow-up enquiry about the unit’s operation after repair. The quotation above is an English translation of the original German reply. industrypart prepared the accompanying context and technical background. The feedback is anonymised and reflects the situation in October 2026.