✕
Hello! I'm happy to help you with any questions about our service offerings.
FANUC A06B-6088-H422#H501 am Prüfplatz nach der Überholung
20.11.2026 by Viktor Siebert
FANUC A06B-6088-H422#H501: Spindle speed fluctuations and Alarm 18

The first symptom was unstable CNC spindle speed. The FANUC A06B-6088-H422#H501 later displayed Alarm 18 (AL-18), “Program ROM sum check error”. Our workshop found a faulty cooling fan and carried out a complete preventive overhaul of the spindle amplifier.

What the spindle amplifier does

The amplifier supplies power to the spindle motor in a CNC machine. It regulates spindle speed using the command from the CNC and feedback from the drive system. Depending on the machine, fluctuations may be related to the amplifier, feedback system or mechanical components. The order of the symptoms was an important clue in this case.

What Alarm 18 means

“Program ROM sum check error” indicates an abnormal checksum during the amplifier’s internal software integrity check. The alarm points to the spindle amplifier’s control electronics. CNC machining programs are stored separately. A diagnosis is required to find the component involved.

Workshop findings and overhaul

The cooling fan in this unit had failed. Reduced cooling exposed the electronics to prolonged thermal stress. Components aged faster and began to fail intermittently. That fit the reported sequence of sporadic speed fluctuations followed by the alarm. We carried out a complete overhaul including preventive work.

Testing and prevention

The video below shows a functional test at the FANUC test bench. Regular maintenance should include checking the fans, air passages and cabinet filters. If a fault is intermittent, record the speed, time since startup, machining operation and alarm sequence. These details help narrow down the fault.

Price, Lead Time and Further Information

Repair is available for the #H501 version. Request a price and lead time through shop item 30549. Please include the full model number, a photo of the nameplate and a brief description of the fault.

https://www.industrypart.com/products/fanuc-a06b-6088-h422-h501-spindle-drive-30549.html

Find out more about our FANUC repair services.

https://www.industrypart.com/fanuc-drives-alpha-alpha-i

Nameplate specifications

ItemSpecification
ManufacturerFANUC LTD
DeviceSpindle Amplifier Module
ModelA06B-6088-H422#H501
MarkingC
Rated input283–325 V DC, 25.2 kW
Maximum output voltage230 V AC
Rated output current95 A
Manual numberB-65162

Main assemblies and diagnostics

AssemblyPurpose and diagnostic starting point
Fan and heatsinkDissipate heat. Have fan operation and air passages checked.
Control board and program ROMRegulate the spindle and run internal checks. Have the electronics examined if AL-18 appears.
Power stageSupply the spindle motor from the DC link. Record operating conditions if a fault occurs under load.
Feedback and interfacesProcess the speed command and feedback. Record commanded and actual speed if it fluctuates.

The complete model number including #H501 and the machine configuration are needed to assess replacement compatibility.

Alarms and troubleshooting

These examples apply to FANUC α-series spindle amplifiers. AL-18 was reported in this case. Use the documentation for the exact version installed.

DisplayMeaning
02Excessive speed deviation
07Overspeed
09Main circuit overload
16RAM error
18 (AL-18)Program ROM sum check error
24Serial data transfer error
25Setting data transfer stopped
27Position coder signal disconnected
29Short-term overload
34Spindle parameter error

Sources

Nameplate and industrypart workshop findings. GE FANUC maintenance manual GFZ-65165E/02, section 3.4.1. https://www.nexinstrument.com/assets/images/pdf/fanucalphamanual.pdf

Model-specific alarm list for A06B-6088-H422. https://kfasllc.com/A06B-6088-H422.htm

Workshop video

Before and after the overhaul

Fan-side view as received
Fan-side view as received
Connector side before the overhaul
Connector side before the overhaul
Overhauled FANUC spindle amplifier on the test bench
Overhauled FANUC spindle amplifier on the test bench
Nameplate with model number and electrical ratings
Nameplate with model number and electrical ratings
Fan-side view after the overhaul
Fan-side view after the overhaul

We are happy to assist you with any questions and inquiries.

Feel free to contact us anytime through our social media channels.

Get in touch with us

Mandatory fields are marked with (*)