The film is about our repairs and tests on Siemens Simatic VS710 6GF1710-3AA Visionsensor Camera.
Your unit will be completely overhauled. The following work will be performed on this camera:
- Replacement of worn and defective parts such as video sensor, capacitors, transistor modules, ICs and resistors.
- Overhaul and testing of all levels e.g. sensor stabilization, video signal modulation, communication levels and network modules.
- The unit will be tested on camera measuring system with original licensed software over an extended time period.
- Thorough cleaning: where required, the old paint will be removed and the relevant surface will be repainted.
The high quality work enables us to provide 12 months warranty for proper functioning.
We know about the following faults, for example, and can remedy them:
Fault |
Cause |
Image is black or noisy |
Video sensor/matrix is defective |
Wrong colors are displayed or color noise |
Video sensor/matrix or video output level is defective |
No function |
Internal power supply unit, processor board is defective |
No communication with the computer |
Processor board is defective |
In principle, any possible faults can be detected and remedied in our test system.
We offer serial repairs for this product series
- Repair of many electronic assemblies according to standardized repair procedures with documentation.
- A larger repair capacity is possible for the same or similar orders
- Target group: machine manufacturers, service companies and distributors
Access to years of experience, specialists and equipment.
Find out more about our series repairs