- Home
- Siemens 1 LA7166-2AA60-Z or 1LA7166-2AA60-Z MOTOR
Leistung [KW] | 18,5 - 21,3 |
N1 [U/min] | 2935 |
N2 [U/min] | x |
Welle [mm] | 42 |
Hohlwelle [mm] | x |
Anzahl der Befestigungslöcher | 4 |
Lochabstand [mm] | 255-260 |
The film is about our repairs and tests on Siemens Simodrive 1FT5 Servo Motors.
The following work will be performed on this engine, is in standard price included::
- Replacement of worn and defective parts such as bearings, connector plugs, sockets and housing parts.
- Overhaul and testing of all levels e.g. smooth running, feedback to CNC, insulation measurement, heating up.
- The engine will be tested on the engine test system with an original drive for a prolonged period of time.
- Thorough cleaning: where required, the old paint will be removed and the relevant surface will be repainted.
Not included: Encoder, Brake Unit, broken or burned parts. Here you get a separately cost estimate.
The high quality work enables us to provide 12 months warranty for proper functioning.
We know about the following faults, for example, and can remedy them:
Fault | Cause |
---|---|
Servo reports encoder fault | Defect on the encoder |
The engine stutters | Defect on the encoder, insulation fault |
Loud metallic noises | Bearings, housing is defective |
High consumption, drive module is overloaded | Insulation fault, bearing |
In principle, any possible faults can be detected and remedied in our test system.
We offer serial repairs for this product series
- Repair of many electronic assemblies according to standardized repair procedures with documentation.
- A repair capacity of 15,000 pieces per year or more is possible for the same or similar units
- Target group: machine manufacturers, service companies and distributors
Access to years of experience, specialists and equipment. Find out more about our series repairs