Repair of Fanuc Alpha I Servo, Spindle Drives and Power Modules e.g.:

• Alpha Serie
A06B-6077, A06B-6078, A06B-6085, A06B-6088, A06B-6089, A06B-6096
• Servo Drives
A06B-6047, A06B-6050, A06B-6058
• Spindle Drives
A06B-6044, A06B-6052, A06B-6055, A06B-6059

We have several test stations for Fanuc Drives for better quality control in use

• Extensive test sites
• In-house repairs
• Output test runs
• Repairs on the component level by qualified personnel
• Use of high quality components; no cheap replicas

Repair service at a glance

• Free initial inspection at the test site
• Standardized complete overhaul by competent specialist staff
• Complete cleaning of the devices, circuit boards and housing parts
• Replacement of all older and used wear parts, as well as readjustment
• An alternative solution is offered for irreparable devices
• 12-month warranty on our repair and exchange service
• Standard repairs in 4-5 days
• Express repairs within 2 days
• Validation of the defect: troubleshooting help for possible external sources of error

Repair of Fanuc motors

Extended department: We now offer repairs for Fanuc servo and spindle motors

• Servo Motor Alpha Serie
a1/3000, a2/2000, a2/3000, aM2.5/3000, a3/3000, aC3, aC6, aC12, aC22, a6/2000, a6/3000, a12/2000, a12/3000, a22/2000, a22/3000, a30/1200, a30/2000, a30/3000, a40/2000
• Fanuc Servo Motos AC Serie
2-0 / 2-0S / 2-0SP, 1-0 / 1-0S / 1-0SP 0 / 0S, 5 / 5S, 10 / 10S, 20 / 20S, 30 / 30S
• Spindle Motor
a1, a2, a3, a6, a8, a12, a15, a18, a22, a30, a40, a50

We can now offer a qualitative repair for this motor series:

• The engine will be overhauled, completely disassembled and old paint and dirt removed
• Assembly is carried out according to strict and precise specifications
• Each motor gets an exactly adapted, new encoder system. High speed ball bearings are used up to 22000 RPM, depending on the speed
• All seals are replaced
• fans are overhauled or completely replaced
• After the repair, the engine is repainted and connected to the test system.additionally, to make sure, we load the engines during the test at the load test station

Motor before repair

Motor after repair